Cap Hanger Hook

Railway Industry of Daqo Group

Product Introduction
OCS is the core power supply equipment in power supply system of electrical railway traction. Its function is to supply power to the running electric locomotive incessantly. Different from the ordinary power transmission line, it must be fixed on the right top of the rail, and then locomotive can get power incessantly through the slip friction between top pantograph and contact wire. So everywhere that electric locomotive running through should span catenary. All catenary installation is hypaethral and it is always affected by kinds of bad weather, as well as its working state is changed with the running of electrical locomotive and has no standby, so working environment for catenary is complex and the request for it is higher. OCS components manufactured by SAITONG introduces and adopts international advanced technology, and optimize the design of key components products according to the technology feature of domestic rail transportation and feature of parallel products. The whole series of products have been homebred, and this caters to the construction and operation of Chinese rail transportation better. Aluminum alloy and copper alloy are adopted much in our product forging, now we have two forging line, and the manufacturing capability hits 2000kms/year. SAITONG is making the core components of Siemens Re250km/h and Re350km/h in China and can produce all catenary components refer to Chinese railway standard; we have passed the test of P.R.C catenary components inspection station. we have the sales ability.

Functional Features
A. Cantilever steady components
Application and Scope
Cantilever steady equipment is used to locate contact wire in electrical railway canetary system. The material of cantilever can be charry-steel and aluminum alloy. Flat Cantilever composes the angle top of hinged cantilever structure, one end of flat cantilever support canetary through the messenger wires supporting clamp, and the other end is joint with strut insulator. Inclined cantilever supports the flat cantilever with binaural sleeve and the other end is joint with strut insulator. Typical installation structure as follow.
1. Cantilever
When the cantilever is made of carbon steel, seamless steel pipes which refer to the standard of GB/T8162 can be used, while the cantilever is made of aluminum alloy, alma Ilium pipes AlMgSilF31 that refer to the standard of DIN 9107 can be used.
Its min. horizontal breaking load is not less than 24.17kN, and min. vertical breaking load is not less than 15.0kN.
2. Inclined Cantilever binaural sleeve
Inclined Cantilever binaural sleeve is stable at the end of inclined Cantilever to join inclined cantilever and flat cantilever. It is made of the material of cast aluminum alloy EN AC-AlSi7Mg0.6 that refer to the standard of DIN EN 1706 and made by metal mould forging technology. Its working load is not less than 4.0 kN, the min. breaking load is not less than12.0kN, and tightening torques of clamp bolt is not less than 50Nm.
3. Canetary supporting clamp
Canetary supporting clamp is stable at flat cantilever to support and fasten copper alloy canetary that the cross-section is about 70-120 mm2.The top of it is used to support stable line and siding canetary,it can rotate around the horizontal axis free. Canetary supporting clamp is made of the material of cast aluminum alloy EN AC-AlSi7Mg0.6 that refer to the standard of DIN EN 1706,and made by metal mould forging technology. The working load is 6.0kN; the min. breaking load is less than 18kN; Tightening torques: 56Nm for bolt M12, and 70Nm for bolt M16U.
4. Cantilever support
Cantilever support fixes and supports flat and inclined cantilever, it joins with flat and inclined cantilever through Cantilever support binaural sleeve. Cantilever support can be made of carbon steel and aluminum alloy. When the cantilever support is made of carbon steel, seamless steel pipes GB/T8162 can be used, but when the cantilever support is made of aluminum alloy, alma Ilium pipes AlMgSilF31 that refer to the standard of DIN 9107 can be used. Its working load is not less than 9.4 kN; the min. breaking load is not less than28 kN.
5. Steady ring
Steady ring is fixed on the cantilever, it provide installation support to binaural sleeve components, such as cantilever support binaural sleeve and inclined cantilever. Steady ring is made of the material of cast aluminum alloy EN AC-AlSi7Mg0.6 that refers to the standard of DIN EN 1706, and is made by metal mould forging technology. The working load is 5.0 kN; the min. breaking load is not less than15 kN; Tightening torques: 70Nm for bolt M16U.
6. Steady Tube, Hook end fitting
Registration arm provides location support to positioner; one end is joint with registration arm while on the other end pipe cap is installed.
Hook end fitting is fixed in the bottom of registration arm to make it join with inclined cantilever.
Registration arm can be made of carbon steel and aluminum alloy. When the Registration arm is made of carbon steel, seamless steel pipes that refer to the standard of GB/T8162 can be used, but when the Registration arm is made of aluminum alloy, alma Ilium pipes AlMgSilF31 that refers to the standard of DIN 9107 can be used.
Hook end fitting is made of the material of cast aluminum alloy EN AC-AlSi7Mg0.6 that refers to the standard of DIN EN 1706, and is made by metal mould forging technology.
The working load is 2.5kN; the min. breaking load is not less than 7.5kN; Tightening torques: 70Nm for bolt M16U.
7. Steady Arm
Steady Arm has below three kinds, straight, angle and curved steady arm. It is used for clamping the contact wire and ensuring the wire is fixed towards the direction of the line under the request of design. In overlap and curve section of the line, angle and curved steady arm and corresponding bracket will be used.
Steady ear, hook end fitting, grooved stud and rectangular pipe are main components of Steady Arm.
Positioner uses CuNi2Si material that refers to the standard of EN 12165.
Hook end fitting uses EN AW-6082 material that refers to the standard of EN 755-2.
Rectangular pipe uses EN AW-6082 material that refers to the standard of EN 755-2.
Hook end fitting, grooved stud cover and Steady ear are produced with precision casting process for metal mold.
Its working load is 3.5kN and the minimum anti-destroy load is not less than 10.5 kN.
8. Drop bracket
Drop bracket is installed on the registration arm with U style bolt, and the hook at the bottom of it is used for the link of hook end fitting. The position of the steady arm can be adjusted by changing the location of U style bolt on registration arm.
Positioner bracket uses EN AW-6082 materials that refer to the standard of EN 755-2 and are made by metal mould forging technology.
Its working load is 3.5kN and the minimum anti-destroy load is not less than 10.5 kN.

B. Electrical Connection Component
Application and Scope
Electrical connection joins catenary and contact wire and conveys power in power line to contact wire. It includes the electrical clamp for messenger wire and for contact wire and parallel connecting clamp
1. Electric connecting clamp for Messenger wire
Electric connecting clamp for messenger wire is used for the joint of electrically connector and catenary, it uses E-Cu material that refers to the standard of EN 1787 and is made by forging technology.
The gripping load shall not be less than 4.0 kN. The continuous carrying capacity shall not be less than 540A, with the 5min overload carrying capacity not less than 760A.The tightening torque for the bolt is 25Nm.
2. Electric connecting clamp for contact wire
Electric connecting clamp for contact wire is used for the joint of electrically connector and messenger wire, it uses E-Cu material that refers to the standard of EN 1787 and is made by forging technology. The gripping load shall not be less than 2.0kN. The continuous carrying capacity shall not be less than 500A, with the 5min overload carrying capacity not less than 700A.The tightening torque for the bolt is 44Nm.

C. Integral Dropper Components
It is suitable to hung copper alloy or copper contact wire on copper alloy catenary in overhead contact system for electrified rail, to adjust the tension of contact wire. Dropper structure shall adopt thimble type. Body of dropper is U type structure; press-jointed connection will be used for connecting contact wire and dropper. Press-jointed shall be done in site and actual length will be defined according to construction requirement .dropper length can be adjusted. To avoid to be hurt by current, reliable electrical connection and prevention measure between dropper and messenger wire and contact wire shall have reliable electrification connection and protective measures. Max vertical work load of integrated dropper is 1.3kN. Tensile failure load of integrated dropper assembly shall not less than 4.0kN. Slide load between integrated dropper and contact wire and messenger wire shall not less than 1.0kN.
1. Dropper clamp for messenger wire
It is covered and clamped on canetary to connect dropper wire of hanger contact wire, the material is CuNi2Si that refers to the standard of EN12165 and is made by stamping technology. Tightening torque of bolt is 32 Nm; tensile failure load is not less than 3.9kN.
2. Dropper clamp for contact wire
Clamp the contact wire and join with dropper clamp for messenger wire with dropper wire, the material is CuNi2Si that refers to the standard of EN12165 and is made by stamping technology. Tightening torque of bolt is 32 Nm; tensile failure load is not less than 3.9kN. It is well-matched with pantograph and not hurt pantograph under the -30 offset condition.

D. Anchor Components
Application and Scope
The clamp is applied in mid-point of one tension length with both sides of compensation in overhead catenary system (OCS) of the electrified railway to stable and connect canetary, mid-anchor junction and connecting wire, and this can prevent the leap between connecting wire and canetary caused by heat or cool and other factor.
1. Anchor clamp device for messenger wire
Connection Clamp is installed on the catenary of the mid-anchor section and the material is CuSn, made by metal mold forging process. The slide load is not less than42.35kN. The break load is not less than 54kN. Tightening torque is 56Nm.
2. Anchor clamp device for contact wire
The Mid-point anchor clamp for contact wire is installed on the contact wire of mid-anchor section and includes a clamping body for attachment to the contact wire grooves and two flaps for connection to one Mid-point anchor rope, one thimble and one compression connector to terminate the Mid-point anchor rope to the flaps. The body is made by metal mold forging process. The slide load is not less than54kN. Tightening torque is 46Nm.

E. Tensioning Device Components
Application and scope
Scope of application: The tensioning device is applied in both end of one tension length with both sides of compensation in overhead catenary system (OCS) of electrified railway to tighten catenary and contact wire.
Performance
The nominal transmission ratio: 1:3. The transmission efficiency is 97%. The working load of turnbuckle is 61.7kN. The min. failing load is 185kN. Calculated breaking load of wire is 74kN. The min. breaking load of connection fittings is not less than96kN.
Tension wheel
Tension wheel body is made of CtAl that refers to the standard of EN 1706, the maximum of its working tension is 40 kN, and drive ratio is 1:3. Connection fittings that join the body of tensioning wheel, wire and anchor Insulator are made by metal mould forging technology.

F. Anchorage Components
Application and Scope
Scope of application: The clamp is applied terminal anchoring point for copper alloy messenger wire and contact wire in overhead catenary system (OCS) of electrified railway.
1. Terminal Anchor Clamp for Messenger Wire
It is used to anchorage catenary at the end, adapting wedge type, and it is made of duralumin alloy material that refers to the standard of ISO 1637-87. It is made by metal mould forging technology. The Tightening torques is 80Nm; Sliding load is not less than 60.81kN; The min. breaking load is not less than67kN.
2. Terminal Anchor Clamp for Contact Wire
It is used to anchorage contact wire at the end, adapting wedge type, and it is made of duralumin alloy material that refers to the standard of ISO 1637-87. It is made by metal mould forging technology. The Tightening torques is 80Nm; Sliding load is not less than 60.81kN; The min. breaking load is not less than67kN.

G. Section Insulator
Application and Scope
It is used in overhead contact system for electrified railway to divide the contact system into some unattached electrical departments, and this is convenient for installation, test and maintenance.
Specification and Allocation
Section insulator is composed with insulator body and iron components, includes messenger wire, termination fitting for catenary, catenary insulator, junction components and section insulator suspension equipments. Section insulator is made of copper, stainless steel, copper nickel, and silicon alloy, Insulator on catenary is made of GFRP, conical termination fitting is made of albronze.
Performance
The contact between insulating body of section insulator and pantograph is directly sliding. The insulating body has sufficient ability for anti-arcing and self-cleaning, and has the function to guide the arcing. During the sliding passage of pantograph, no electric breaks appear. The material of section insulator has higher ability of anti-arcing in order to avoid any damage due to burning of all the parts of section insulators. The body of section insulator is made of light alloy material with high mechanical performance and polymerized material with high strength and anti-corrosion material. The assembly is light in weight. The metal connection parts and all the accessories, fastening pieces are made of anti-corrosion material. They can bear the working load reliably with efficient safety factor. The insulating parts of section insulator and MW (including insulating slider) are self-cleaning and water repelling. Service life of the whole set of the section insulator is not less than 15 years.

Technical Parameter
Power frequency dry withstand voltage is 163kV.
Power frequency wet withstand voltage is 132kV.
Full wave impulse withstand voltage is 40 kV. (Standard lightning impulse withstand voltage)
Power frequency pollution withstand voltage is 40kV. (Surface density of salt covering is 0.35mg/ cm2)
Creepage distance is ?1200mm.
Min. failing load is ? 90Kn.
the working load is ? 30Kn.
Performance of anti-vibration ? 2*106 times.
Performance of anti-wear (times of pantograph) is ? 5*105 times.
Minimum of air distance is ? 220 times.
Unit weight is 15.5kg.

About the Author

by Daqo Group

Hat Rack

Cap Rack 36 System $19.19 Display a total of 36 caps on this versatile over-the-door cap rack! The 5-foot cord allows multiple placement options, while the innovative clips can be spaced anywhere along the cord, for unlimited display options. This hat rack may be hung over a door, on a wall, looped over a closet rod, and even hung from the ceiling. Use it in the living room, bedroom, den, or garage – it’s also perfect for …

Expanding PEG Rack 10 Hooks Hardwood Multi-purpose Vertical or Horizontal Wall Mount $1.87 This multi-purpose expanding rack just the thing you need for that room that needs a little extra space or organization. Its 10 pegs can hold coats, hats, mugs, pet leashes and more ! You can hang it vertically or horizontally-whatever meets your hanging needs best. It’s attractive natural wood construction with a clear lacquer finish matches many color schemes and decor….

Spectrum 82200 Seven-Peg Wood Rack, White $10.94 Create more closet space by hanging coats, hats and more on this attractive wooden peg rack. Made of solid wood with a white painted finish, these coat hooks mount directly to the wall, adding character and giving you additional storage space. Available with 7 hooks. Mounting hardware included. ….

SALE 50% OFF! Ear Hook Kit Replacement for Bluetooth earhook 2-black, 2-clear clip loop (6-free Foam Buds) COMPATABLE WITH: Lg-hbm 210 230 235 330 520 570 730 760 770 800 Motorola h12 h15 H270 h371 h375 h385 h390 h560 h620 h680 h681 h690 h695 h780 h790 HK100 HK200 Samsung Wep 480 490 650 750 850 870 Samsung Bhm 3500 & Plantronics 925 975 M100 Please Verify Your Make/model Before Purchase! Contact Us with Issues. Thanks Bluetooth Fixer $1.99 These hooks, gels are compatible with these models. Please do not purchase this set if you want exact replicas of your existing Bluetooth parts. Thank you Bluetooth Fixer TM…

Sony Sport Over-The-Ear Earbud Headphones Black/Silver 0.7m Extension Cord Included $47.99 SONY MDRAS40EX Sport Over the Ear Headphone….

Sony Sport Around-The-Ear Headphones Black/Silver Soft Loop Hangers 1.2m Cord Length $33.99 SONY MDRAS20J Sport Around Ear Headphone….

Handicap Placard Protective Plastic Holders Set/2 $6.84 Protect Your Parking Permit. Keep your valuable handicap or disabled parking permit safe from rips and tears. Just slip it into this sturdy plastic sleeve with built-in hanger. Measures 11.5″ x 4″….

Hard Plastic Gecko Shape Suction Cap Hanger Hook Yellow $4.49 Description:The Suction Cap Hook kept in place by air suctionMade with 4 suction cups, this Gecko Shape Hanger can be fixed on any smooth,clean and dry surface.Ideal for organizing towels in the bathroom and hanging kitchenware in the kitchen.Design with gecko shape appearance, this Hard Plastic Gecko Hook also can be as a decoration in your living placeMade of hard plastic material, durable and washable for your daily use.Hard Plastic Hanger hang bag and clothes casually.This hanger can remove and reuse that you can use it time after time.Size: ~2 3/4inch(7cm) x 2 1/4inch(5.7cm)(L*W).Suction cup diameter: ~3/4inch(1.9cm).Weight: 13g.Package content:1 x Suction Cap Hanger.

Lantern Hanger – Inground Mount Galvanized $95.99 The lantern hanger is 2-3/8 inch 0.0. pipe. Standard hanger has a galvanized finish with an end cap and lantern hook included. Also available as ADA accessible. Lantern hanger is an inground mount.

Hard Plastic Gecko Suction Hat Adjustable Hanger Hook $4.49 Description:The Suction Hat Hook kept in place by air suctionIdeal for organizing towels in the bathroom and hanging kitchenware in the kitchen.Made with 4 suction cups, this Hard Plastic Hanger can be fixed on any smooth,clean and dry surface.Design with gecko shape appearance, this Gecko Hanger Hook also can be as a decoration in your living placeMade of hard plastic material, durable and washable for your daily use.Adjustable Hanger Hook hang bag and clothe casually.This hanger can remove and reuse that you can use it time after time.Size: ~2 3/4inch(7cm) x 2 1/4inch(5.7cm)(L*W).Suction cup diameter: ~3/4inch(1.9cm).Weight: 13.2g.Package content:1 x Suction Cap Hanger.

Extender Hanger with Wide Hook $26.47 Need more versatility in your outdoor decorating? This extender hanger with a wide hook could be your answer. This hook is made of wrought iron with a powder coated finish for durability and strength. Easy to mount , this extender hanger with wide hook is versatile, attractive and durable. * Finish: Powder Coated – BlackConstruction: Wrought Iron12 in. L

Lantern Hanger – Inground Mount Powder Coated $99.99 The lantern hanger is 2-3/8 inch 0.0. pipe. Powder coated finish (galvanized shown in picture) with an end cap and lantern hook included. Lantern hanger is an inground mount. Provide color during the order process.

Handbag Hanger Purse Hook $25 A revolutionary new instant handbag hanger that holds up to 40 lbs! This versatile hook can hang on your bag’s shoulder strap so it won’t get lost in the bottom of your purse – or even better – it can be worn as a bangle. It’s that elegant! Made

5 Hook Hanger (White) $2.9 This hook includes 5 hangers in total.

Ook 55220 Push N Hook Wire Hanger $15.93 Push N Hook wire hanger Easy to use Carded

Droll Yankees Hook Hanger – 28 $10.99 This durable Droll Yankee 28?? 1/2 Standard Hook Hanger is perfect for hanging your birdfeeder or birdhouse from a tree or house. Its solid aluminum hook hangs on a branch or pole up to 6?? 1/2 in diameter.

Tillamook Hook 36in. Double Adjustable Deck Hanger TADRD36 Pack of 6 $185.46 Adjustable deck hanger. Double hook. Black. 36

Overdoor Hanger Hook – Chrome by Spectrum® $11.49 The newly designed Over door Hanger Hook – Chrome by Spectrum, offers the perfect solution to create extra hanging space for clothes and other accessories in every room of your home. Made of strong metal with an excellent chrome finish, these hanger hooks is designed specially to hold clothes along with the hanger, just the way they are held in your closet. The compact hanger valet hook has a horizontal bar that allows you to hang several hangers. It also features a hook with a rounded head at the end, to hold accessories like a backpack, handbag, purse, winter coat, bathrobe, etc. This valet hanger hook requires absolutely no complicated installation procedures; simply attach it over your door with its sturdy clamp and your over door hanger hook is ready to use. The subdued chrome finish adds a simple charm and elegance to the hardware and makes it a perfect match for any interior decoration. Features: • Strong metal construction • Space for multiple hangers • Hook at the end for hanging accessories • No-tools over the door installation • Finish: ChromeSize: 4″tall x 1 1/4″wide x 4″tall x 5 3/4″deep

Maxsa 5 Hook Multi-Hanger $19.98 - Maxsa multi-hook hanger- Hooks onto headrest post- Suitable for all twin-post headrests- 5 Multiple purpose hooks on the bar- Ideal for shopping bags, umbrellas, jackets, hats or any other everyday itemMXS20059

Walnut 24 Hook Tie Hanger $6.99 The walnut 24 peg tie hanger is made of hardwood and can hang up to 24 ties neatly. The 24 chrome pins included with this tie hanger curve inwards, preventing your ties from folding or slipping. Features: • Durable deep walnut hardwood hanger • Chrome hook hangs on closet rod • 24 chrome tie pins • Color: walnut Size: 6″tall x 16 1/2″wide x 1 1/4″deep

J-Hook Hanger, 3 $13.59 Hang whatever you desire with this hand-forged wrought iron hook from Achla Designs. Hardware included for installation Type: Hooks and Racks

Detachable Fastener Rotating Hanger Hook (Black) $3.11 Hoop and loop fastener design plastic hanger.

Detachable Fastener Rotating Hanger Hook (Red) $3.11 Hoop and loop fastener design plastic hanger.

Detachable Fastener Rotating Hanger Hook (Yellow) $3.11 Hoop and loop fastener design plastic hanger.

Detachable Fastener Rotating Hanger Hook (Blue) $3.11 Hoop and loop fastener design plastic hanger.

J-Hook Wall Hanger, 4 $14.75 J Hook Wall Hanger. Also available in a 6″. Made of Wrought Iron. Black powder coated. Construction material: Wrought iron. Warranty Term: 90 day from manufacturer’s defect. Dimensions:. Height: 2.5. Width: 0.5. Depth: 4 Type: Hooks and Racks

J-Hook Wall Hanger, 6 $15 J Hook Wall Hanger. Also available in a 4″. Made of Wrought Iron. Black powder coated. Construction material: Wrought iron. Warranty Term: 90 day from manufacturer’s defect. Dimensions:. Height: 3.5. Width: 0.5. Depth: 6 Type: Hooks and Racks

J-Hook Wall Hanger $24.97 These J-shaped hook wall hangers come in two lengths Constructed from black wrought iron with a powder coated finish, these hangers are available in either 4 inches or 6 inches. Very sturdy and versatile. These J-shaped hook wall hangers come in 4-inch or 6-inch lengths. They are made of black wrought iron with a powder coated finish .. * Finish: Powder Coated – BlackConstruction: Wrought Iron4 in. L6 in. L

Pair Cute Cartoon Hanger Hook with Velcro Strap $8.49 Description:This is a very Cute Cartoon Hanger Hook that can be used to hang all kinds of items.With a Cartoon figure on the top and a velcro strap at the top of the Cartoon.Hang the velcro strap to a pole or rod, easy application. The Pair Hanger Hook can be removed and used again.Ideal for hanging toy, pictures, baseball caps, signs, tools, ornaments, decorations,etc.The Hanger Hook with Velcro Strap is great gift and fun for the family.Size: 14.5cm long ( at the longest ) Approx.Comes with 2 Hanger HookColor: as the picture showWeight: 70g.Package Contents: 2 x Hanger Hook with Velcro Strap

Tillamook Hook TADR-36 36 Adjustable Deck Hanger (6 Pack) $103.57 Tillamook Hook 36″ Adjustable Deck Hanger (6 Pack) Black Tillamook Hook 36″ Adjustable Deck Hanger (6 Pack) Features: Adjustable deck hanger Single hook Black 36″

Tillamook Hook TADRD-36 36 Double Adjustable Deck Hanger (6 Pack) $111.93 Tillamook Hook 36″ Double Adjustable Deck Hanger (6 Pack) Black Tillamook Hook 36″ Double Adjustable Deck Hanger (6 Pack) Features: Adjustable deck hanger Double hook Black 36″

MAXSA Innovations / Maxsa 5 Hook Multi-Hanger / 20059 $25.3 MAXSA Innovations – Maxsa 5 Hook Multi-Hanger – 20059

Multi-function Plastic Rotatable Pothook Hook Hanger $1.69 This is Multi-function Plastic Rotatable Pothook Hook Hanger. Own durable material, the Multi-function Plastic Rotatable Pothook Hook Hanger is great for long time use. Also you can make full use of it as you wish. Furthermore, you can take it as gift to your friends or relatives.

O-Hook Flower Pot Hanger – Set of 2 $25.68 The O-Hook Flower Pot Hanger is 6″ long and gives your hanging pots and baskets some breathing room. The rustic and rugged construction adds strength as well as style. The O-Hook Flower Pot Hanger is crafted from iron, powdercoated in black. * Set of 2Made of IronBlack Powdercoat finish6 in. L

Plant Hanger: Shepherd Hook 36 in $7.95 “Use this Shepherd hook to hang plants or decorations in your yard and garden. The hook measures 36″” high. The hook is secured to the ground using a push in staking system.”

Merrick Swivel Hook SuitCoordinate Hanger C89521SNC12 WHT $24.17 Deluxe swivel hook suit and coordinate hanger. Assorted colors in White Navy and Hunter. 5 per card. Length: 9.25. Width: 1.75. Height: 16.75

Tillamook Hook A1524 15 Curved Wrought Iron Hanger (12 pack) $64.42 Tillamook Hook A1524 15″ Curved Wrought Iron Hanger (12 pack) Tillamook Hook A1524 15″ Curved Wrought Iron Hanger (12 pack) Features: Curved hanger with scrolled end Wrought Iron 15″

Tillamook Hook B1220 12 Curved Wrought Iron Hanger (12 pack) $64.46 Tillamook Hook B1220 12″ Curved Wrought Iron Hanger (12 pack) Tillamook Hook B1220 12″ Curved Wrought Iron Hanger (12 pack) Features: Curved hanger with scrolled end Wrought Iron 12″

Tillamook Hook C1520 15 Straight Wrought Iron Hanger (12 pack) $64.46 Tillamook Hook C1520 15″ Straight Wrought Iron Hanger (12 pack) Tillamook Hook C1520 15″ Straight Wrought Iron Hanger (12 pack) Features: Straight hanger with scrolled end Wrought Iron 15″

Tillamook Hook T1420 14 Straight Wrought Iron Hanger (12 pack) $64.46 Tillamook Hook T1420 14″ Straight Wrought Iron Hanger (12 pack) Tillamook Hook T1420 14″ Straight Wrought Iron Hanger (12 pack) Features: Straight hanger with downturn end Wrought Iron 14″

Practical Colorful Character Door Hook Hanger $16.86 This hanger helps you to hang your coats, hats, scarves, etc.