Straight Partition Panel

Cabinet Building Basics for Diy’ers

From dressers and vanities to kitchen and bath designs, building great cabinets means knowing the basics.

Regardless of whether you are building a stereo cabinet or dresser, a kitchen cabinet or bathroom vanity, basic cabinet construction is the same. A cabinet or furniture piece consists of the carcass or case with two sides, bottom and top, a back and a front. The front may contain drawers, doors or shelves or combinations of the three. Several variations may be used in the construction.
 
The carcass construction can be separated into three types: leg-and-rail, frame-and-panel, and box or case. Leg-and-rail construction is found on chairs, tables, benches, stools and on some furniture such as chests.
 
Frame-and-panel construction is used to make up the component parts of many types of furniture including the sides, doors and interior web frames with dust panels that are used on many fine, hand-built pieces of furniture.
 
Box or case construction is the basic design of dressers, buffets, desks and chests, as well as kitchen cabinets and bathroom vanities.
 
The simplest case construction is a box made of plywood. These can be softwood or hardwood plywood, and they can be painted or stained and varnished. Particle board, finished on one or two sides, is a common material for construction of some cabinetry. A case can also be constructed of solid wood, but these days solid wood is used only on small pieces or for extremely fine furniture.
 

The simplest cabinetry is a box construction such as a kitchen cabinet. Shown is the typical construction dimensions of an applied-facer kitchen cabinet base.

Kitchen Cabinet Case Construction
Both upper and lower cabinets have the same basic construction details. On the lower cabinet, the first step is to cut the two sides. Incidentally, you can construct a custom kitchen cabinet to fit any space, rather than the small individual sections joined as with purchased cabinetry. Or you can make up smaller units and join them in the same fashion. If a side is to be concealed against a wall, that side can be made of more economical plywood. The exposed side should be cut from a good hardwood- or smooth softwood-surfaced plywood.

This is the typical construction of an upper kitchen cabinet with applied facer.
 
The following is the simplest method of constructing, using glue and finish nails that are then set below the surface and the holes filled with wood putty. Cut a 1/4-by-1/4-inch rabbet in the inside back edge of each side piece for the cabinet back. The bottom shelf is raised above the floor on most cabinets to create a “toe-space” or kick board. Locate the position of the bottom on the side pieces and mark the kick board cut-out on each cabinet side. Cut using a saber saw.
 
In most instances the bottom front facer is 1-inch in width, allowing for a 1/4-inch lip to protrude down into the toe space. Mark this location and then use a carpenter’s  square to mark a line for the bottom. Cut the bottom 1/4-inch narrower than the sides, and then fasten the bottom in place with glue and finish nails, making sure it is aligned with the squared marks. Install a nailing-strip at the top back. Cut this to fit between the two sides and fasten in place with glue and finish nails. Cut the back to the correct size from 1/4-inch plywood or hardboard and, with the case lying face down, lay the back in place. Use a carpenter’s square to make sure the case is square, and then fasten the back in place with 1/2-inch staples and an air nailer, or with 3/4-inch coated nails.
 

First step is to assemble the basic box, in this case of plywood, with glue and screws or nails.
 

Cut the side facers first. Apply glue to the case edge.
 
Turn the case upright and you’re ready to install the facings. Cut and install any dividers of shelves. The simplest method, especially for overlap doors, is to install veneer tape over the plywood edges. These edges must first, however, be sanded smooth. A more traditional method is to install individual facer strips over the front edges of the case. These normally fit flush with the outside edges of the case, but overlap the inside edges.
 
Cut the two side casings first, fitting them flush with the upper end of the sides and the lower edge of the toe space. Fasten these in place with glue and No. 6 finish nails. Then cut the lower facer to fit between the two side facers, ensuring the correct width to match the top edge of the bottom shelf and the bottom edges of the toe spaces on the sides. To cut to length, cut one end smooth and square, then hold it in place and use a sharp pencil to mark the length. Cut the pieces square using a fine-toothed blade in a radial arm saw. Glue in place and fasten with No. 6 finish nails into the case-bottom edge. Use No. 8 finish nails through the side facings into the sides to further secure in place. Cut the top facing in the same manner, ripping to width, and then cutting to length. All facers should have their edges jointed smooth.
 

Align the facer flush with the case edge and fasten in place with finish nails.
 

Set the nail heads slightly below the wood surface.
 

Then measure the upper facer to fit precisely between the two side facers. 
 
In this case the top facing is fastened between the two side facings with glue and No. 8 finish nails through the edges of the side facings into the ends of the top facing. If the cabinet has drawers, cut facers and install in the same manner. Cut door and drawer dividers to fit between the drawer bottom facer or facers and the upper or lower facer as needed. These can be anchored in place with toenail-driven, self-starting wood screws in countersunk holes, with glue and finish nails, or with glue blocks from the backside. Wood strips 3/4-by-1 1/2-inches are fastened inside the front and back, and to the sides at the top for anchoring a countertop in place.
 
 
Use a fine-toothed saw and make a square cut so there is no opening in the joint.
 

Nail the top facer in place, and then install the bottom facer in the same manner.
 

Install the divider facers in the same manner.
 

Anchor the ends of the facers with No. 8 finish nails through their mating facers.
 
At this point the cabinet bottom is ready to be installed. If plumbing is to be installed for a sink, and electrical connections for a disposal are needed, measure and cut the openings at this time. Then place the cabinet in position. The cabinet must be level in all directions. Use a four-foot level to determine level and wood shingles as shims to ensure a level unit. Locate the studs in the wall and fasten the cabinet in place with screws through the rear top nailing strip. The cabinet back can also be fastened to the wall with screws into the studs. Build the countertop and install.
 
Upper cabinets are constructed in the same basic manner, using box or case construction for the sides, bottom and a 3/4-inch plywood top. In this case the sides, top and bottom all have 1/4-by-1/4-inch rabbets ripped in their inside edges for the plywood or hardboard back. The facings are cut and installed in the same manner. Upper cabinets are anchored to the wall with a nailer strip at the top and through the back into the studs, as well as with screws through the back into the studs. Homemade cabinet jacks of 2-by-4′s with shingle wedges can be used to temporarily hold the upper case up in position and help level and plumb it until you can get it fastened solidly in place.
 

Set the nails slightly below the surface.
 

Then fill all nail holes flush with wood putty.
 

Vertical facers are often anchored with counterbored screws from the inside edges.
 
A more intricate form of construction involves creating a facing frame of mortise and tenons joints. The front facing frame is then anchored to the case sides, top and bottom with glue blocks and countersunk wood screws from the inside or with glue and biscuit joints. This totally eliminates the nail holes that must be filled and is the best method for fine furniture cases.
 

Fine furniture often consists of a case with an assembled facer frame fastened over the front edge of the case. Mitered corners add to the fine construction.

Another form of construction consists of legs-and-rails with panels. The legs-and-rails are assembled with mortise-and-tenon or dowel joints. The panels are held in rabbets.
 
Frame-and-Panel Construction
With this type of construction, the corner posts of the assembly, which may also be the assembly legs, are fitted with panels. The frame consists of rails and stiles fastened together with mortise and tenons or dowels. The corner posts or stiles may be rabbeted or dadoed to accept the panels, or the panels may be held in place with dowels or biscuits. This is a very popular method of constructing small chests and tables, as well as larger pieces of fine furniture. The panel may be constructed of thinner, or thicker, stock that is shaped at the edges.
 
The inside framing on built-ins and simple furniture can consist of shelving standards with adjustable wooden shelves, or wooden shelf strips can be used to support permanently located shelves. Drawers can use metal slide systems. On fine cabinetry and furniture, however, the inside construction is as important as the outside because the inside framing not only provides for drawers and shelves, but also provides strength. Drawers are often supported by inside wooden partitions called web frames. Solid stock or plywood may be used, but they add a great deal of weight. Open frames are commonly used. If the frames are fitted with thin wood panels they are called dust panels. Dust-panels and web-frames are marks of quality furniture. They are always used on desks or bureaus with locked drawers; otherwise you could remove an upper drawer and get into the contents of the drawer below it. 
 

Many fine furniture constructions use web frames with dust panels between the drawers.
 
These frames are normally assembled with mortise-and-tenon joints, and with dadoes for the thin wooden dust panels. The web frames may be held in place with glue and nails or screws. More often, the frames are fitted into rabbets or dadoes in the sides of the case and glue blocks used for support under the frame pieces at the back. Although the dadoes in the sides of the case could be the full thickness of the frame pieces, it is best to rabbet the frame edges and cut a narrower dado joint to provide more gluing surface and a stronger joint. A dovetail joint is the strongest for this type of unit; however, the frames must slide in from the front. When a frame-and-panel construction is used for the sides of the case as well, the web frame may be fitted with stub mortise-and-tenons.
 
If the front edge of the frame is also to act as a drawer-front facing, it is covered with hardwood to match the exterior of the project. Otherwise the frame is concealed behind the drawer fronts. If the frames are long, as on buffets, they should have a middle supporting rail or even two supporting rails if necessary.

Doors and Drawers
Doors and drawers can be overlap, lip or flush. Overlap doors and drawers have the entire front thickness exposed. These are often used on “Euro” style kitchen cabinets and bathroom vanities. Lip doors and drawers normally have a 3/8-by-3-inch lip or rabbet around all edges. This allows for using 3/8-inch lip hinges for installing the doors. Flush doors and drawers are fitted with their fronts flush with the case facings. These require great care in building and installing. Flush doors don’t seal off the cabinet as well as overlap or lip doors.

Shown are common door examples.
 
Door fronts may be made of solid wood or 3/4-inch plywood. The outer edges may be left square on overlap doors, but are commonly rounded on lip doors. Drawers are commonly made of solid wood, sometimes of plywood. 
 
Finer furniture, however, often utilizes frame-and-panel construction for the doors and sometimes for the drawers. Or the drawers may be solid wood with shaped fronts. The frame-and-panel doors consist of two uprights, called stiles, and two horizontal pieces, called rails. Some doors also have a third horizontal piece, or cross rail, in the middle. The frame pieces have dadoes cut along their inside edges for panels. Or a rabbet may be cut along the inside edges of the frame, in which case the panel is held in place by molding. The inside edge of the frame is called “sticking.” It can be left flat or shaped, or provided with attached decorative molding. A molded sticking adds to the strength of the frame structure.
 
Frame-and-panel doors may be made in several ways. The simplest is to cut dadoes in the frame pieces then dowel and glue the frame pieces together, inserting the panel in place as you assemble the frames. Or the frame can be assembled with mortise-and-tenon joints. The best method, however, is to use a router or shaper to create shaped stickings. This creates a shaped joint and provides a larger glue surface, as well as a decorative frame edge.
 
The panels inserted into the frames can be thin plywood panels or solid wood with their edges shaped. The top of the frame and panel can be left straight, or an arched panel and top rail may be created on a shaper or with a router.
 
Creating cabinetry, whether building your own kitchen cabinets or a fine piece of furniture is a rewarding task. Start with simple box construction and work your way toward the more complicated construction as you gain experience and tools.
 

Doors and frame-and-panel construction often consist of shaped bead and ogee edges with flat or shaped panels. These can be cut with a router or shaper.
 

About the Author

Monte Burch is a representative of Campbell Hausfeld. Campbell Hausfeld offers a complete selection of Air Compressors, pressure washers, air tools, air nailers, paint sprayers and welders.

Versare Afford-a-wall (Articulating) Portable Partition

HONSP5325CE18 – Simplicity II Straight Partition Panel $114.91 Simplicity II Straight Partition Panel…

HONSP4249CE18 – Simplicity II Straight Partition Panel $178.91 Simplicity II Straight Partition Panel…

HON® Simplicity II Series Panel, 100% Polyester, 25-1/2w x 1-1/2d x 53h, Alumina GY $115.99 HON® Simplicity II Series Panel, 100% Polyester, 25-1/2w x 1-1/2d x 53h, Alumina GYUse as a basic office partition or combine for a full-featured panel system. Sound-absorbing construction keeps noise in and out. Radius edges provide a smooth, clean appearance. Requires only a Phillips screwdriver for assembly. Powder-coated finish on frame helps reduce scratches. Multiple design options for opti…

Simplicity II Straight Partition Panel $162.06 Use as a basic office partition or combine for a full-featured panel system. Sound-absorbing construction keeps noise in and out. Radius edges provide a smooth, clean appearance. Requires only a Phillips screwdriver for assembly. Powder-coated finish on frame helps reduce scratches. Multiple design options for optimal flexibility. Color(s): Alumina Gray; Overall Dimensions: 49 x 65; Material(s): 1…

HONAR SimplicityAR II Straight Partition Panel, 43w x 42h, Aluminum Gray Fabric $147.99 Use as a basic office partition or combine for a full-featured panel system. Sound-absorbing construction keeps noise in and out. Radius edges provide a smooth, clean appearance. Requires only a Phillips screwdriver for assembly. Powder-coated finish on frame helps reduce scratches. Multiple design options for optimal flexibility. Partition/Panel System Component Type: Tackable Panel; Width: 43 in; Depth: N/A; Height: 42 in.

Partition $8.99 Partition

Fellowes Partition Addition Panel Hook $2.99 0% 5 / Pack 75271 Free-up your work surface with these contemporary panel hooks. Easily attaches to fabric partitions with pin hooks. Can easily be removed and repositioned. Black Black Hook Fellowes Fellowes, Inc Hook No Partition Addition Panel Hook Plastic www.fellowes.com

Maximum Visibility Partition Panel Kit $903 As well as being useful for classroom organistaion, the rigid panel partitions can be used to display documents or for drawing (water based pencils only), making collages and so on… Comes with two sizes, a square and rectangular shape.Can be used vertically or horizontally. Using the included partition clips you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet included for increased stability. All our decorated partitions are screen-printed. Set includes: -1 Partition with Curtain: Can be used as passageways for the children. Curtains are easily detached and machine-washable at 90 degrees fahrenheit. 65% poly/35% cotton. 49″ x 24″ -2 Rigid Transparent Partitions: 24″ x 24″ each -1 Window on the Meadow Partition: 49″ x 24″ -1 Display Partition: These panels can hold all kinds of documents and objects, such as notices, drawings, sequencing cards, toys, etc. Washable at 90 degrees Fahrenheit. 24″ x 24″ -4 Pairs of Partition Clips -3 Pairs of weighted feet.

Fellowes Partition Additions Adjustable Panel Clip $3.99 0% 4 / Pack 75270 Display important notes, phone lists, and reference material Fastens securely to any tackable partition to help customize and maximize your workspace Free-up your work surface with these contemporary panel clips. Easily attaches to fabric partitions with pin hooks. Can easily be removed and repositioned. Panel clip holds up to 40 sheets. Fellowes Fellowes, Inc Graphite No Panel Clip Partition Additions Partition Additions Adjustable Panel Clip Plastic www.fellowes.com

Puppet Theatre Partition Panel Kit $693 As well as being useful for classroom organization, the rigid panel partitions can be used to display documents or for drawing (water based pencils only), making collages and so on… Can be used vertically or horizontally. Using the included partition clips you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organizing classrooms easier and removes any danger to children should they fall. Weighted feet are included for increased stability. Quick and easy to put up. Set includes: -1 Theatre Partition, 49″ x 24″ -2 Opaque Partitions, 49″ x 24″ each -2 Pairs of Partition Clips -2 Pairs of Weighted Feet

Deflect-o Partition Hook $15.99 0% 2 2 / Pack 2 Hook 36809 6.50″ Height x 1.50″ Width x 2.50″ Depth Versatile partition hook slides over the top of your partition wall to hold sweaters, coats, bags and more. Use hook to keep work space organized and clutter-free. Partition hook adjusts to fit over a 2-3/4″ thick wall. Deflect-o Deflecto Corporation Garment Gray Gray Hook Hook Panel No Partition Hook www.deflecto.com

Fellowes Partition File Pocket $10.99 0% 1 1 Each 11.20 oz 375 x Sheet 7.75″ Height x 12″ Width x 2.50″ Depth 75275 File pocket performs the same function as traditional desktop collections without taking up valuable desktop space. File pocket is easily repositioned using stainless steel points to firmly grip panel material. Made of high-impact plastic. Keeps important files and documents in plain view. Offers a 1-1/2″ pocket capacity (375 sheets). Additions Adjustable Fellowes Fellowes, Inc File Organization Graphite No Panel Organizer Partition File Pocket Partition-mountable Plastic Wall-mountable www.fellowes.com

Wesco 12613 Puppet Theater Partition Panel Kit $580.41 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on… Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Feet not included. Easy to wash at 90oF. Tha fabric partitions and curtains are detachable thanks to their velcro fastenings. Consists of: 1 theatre partition (ref: 12612) 2 opaque partitions (ref: 4105) 2 pairs of partitions clips (ref: 4100) 2 pairs of weighted feet (ref: 4101). Dimensions: 72 x 49 .

Wesco 613 Puppet Theater Partition Panel Kit $241.61 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on… Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Feet not included. Easy to wash at 90oF. Tha fabric partitions and curtains are detachable thanks to their velcro fastenings. Consists of: 1 theatre partition (ref: 12612) 2 opaque partitions (ref: 4105) 2 pairs of partitions clips (ref: 4100) 2 pairs of weighted feet (ref: 4101). Dimensions : 72 x 49 .

Fellowes Partition Additions Note Rail $7.99 0% 1.94″ Height x 18″ Width x 0.81″ Depth 7502201 Partition Additions Note Rail helps provide maximum organization while clearing off flat work surfaces. Easily mounts on partitions or walls that are 1-1/2″ to 3″ thick. Attaches to any tackable surface. Note rail securely holds up to 5 lb. without damaging mounting surfaces. Cube Fellowes Fellowes, Inc Graphite No Panel Organizer Partition Additions Partition Additions Note Rail Wall-mountable www.fellowes.com

Fellowes Partition Additions Step File $15.99 0% 1 1 Each 5 7528601 8″ Height x 8″ Width x 4.25″ Depth Use the Partition Additions Step File to prioritize hot projects while keeping them within easy reach. Stepped design includes five separate compartments to keep notes and documents accessible for quick reference. Universal design allows for partition or desktop use. Supports up to 5 lb. Patented ViperPin technology securely mounts unit to cubicle walls. Fellowes Fellowes, Inc File Organization Graphite No Panel Organizer Partition Additions Partition Additions Step File Plastic Wall-mountable www.fellowes.com

Fellowes Partition Additions Name Plate $9.99 0% 1 / Pack 2.50″ 75906 9″ 9″ Width x 2.50″ Height x 0.75″ Depth Mounting: Fabric Panel Viewable Area: 1.62″ x 8″ Fellowes Partition Additions Name Plate displays name, title, or department name on partition walls. Area displays text or graphics you customize and print. Patented ViperPin technology attaches to any tackable wall without damaging mounting surface. Fellowes Fellowes, Inc Graphite Name Plate No Outdoor Partition Additions Partition Additions Name Plate Plastic Rectangular Replaceable Steel Steel Pointed clips Tackable Wall-mountable www.fellowes.com

Wesco 4102 61Cm Partition Translucent with Rigid Panel $106.56 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on.. Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Dimensions: 24 L x 24 W.

Wesco 4109 61Cm Modular Partition with PVC Panel $94.72 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on.. Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Dimensions: 49 L x 24 W.

Wesco 4121 Display Panel Modular Partition $125.57 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on.. Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Dimensions: 49 L x 24 W.

Wesco 4104 61Cm Partition Opaque with Rigid Panel $94.72 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on.. Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Dimensions: 24 L x 24 W.

7’4H 3-Panel Portable Partition $963.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 3 Panel Partition measures 5′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

7’4H 9-Panel Portable Partition $1677.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 9 Panel Partition measures 16′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

8′H 9-Panel Portable Partition $1862.59 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 9 Panel Partition measures 16′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

7’4H 13-Panel Portable Partition $2153.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

4′H 3-Panel Portable Partition $642.59 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 3 Panel Partition measures 5′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

6’8H 11-Panel Portable Partition $1772.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 11 Panel Partition measures 20′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

7’4H 5-Panel Portable Partition $1199.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 5 Panel Partition measures 9′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

7’4H 7-Panel Portable Partition $1584.09 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 7 Panel Partition measures 13′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

7’4H 11-Panel Portable Partition $2107.69 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 11 Panel Partition measures 20′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

5′H 13-Panel Portable Partition $1870.09 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

4′H 5-Panel Portable Partition $916.39 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 5 Panel Partition measures 9′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

6′H 5-Panel Portable Partition $1166.71 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 5 Panel Partition measures 9′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

6’8H 7-Panel Portable Partition $1319.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 7 Panel Partition measures 13′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut.

Wesco 12612 Modular Partition Panel Puppet Theatre $236.87 As well as being useful for classroom organistaion the rigid panel partitions can be used to display documents or for drawing (water based pencils only) making collages and so on… Available in two sizes with a square or rectangular shape.Can be used vertically or horizontally. Using the partition clips (ref: 4100) you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organisating classrooms easier and removes any danger to children should they fall. Weighted feet for increased stability. Feet not included. Feet not included. Easy to wash at 90oF. Tha fabric partitions and curtains are detachable thanks to their velcro fastenings. Dimensions: 49 L x 24 W.

Fellowes Partition Additions Triple Tray $28.99 0% 1 1 Each 13.50″ Height x 10.62″ Width x 17.87″ Depth 3 3.16 lb 75310 Maximize your work space. Hang triple wire side-loading tray from your cubicle wall to clear off valuable work surfaces. Easily mount on partitions or walls that are 1-1/2″ to 3″ thick. Each tray holds letter-size documents. Wire Triple tray measures 17-7/8″ in height for a partition mount and 11-7/8″ in height for wall mount. Black Fellowes Fellowes, Inc File Organization No Panel Organizer Partition Additions Partition Additions Triple Tray Steel Wall-mountable www.fellowes.com

Rainbow Modular Partition $817 As well as being useful for classroom organization, the rigid panel partitions can be used to display documents or for drawing (water based pencils only), making collages and so on… Can be used vertically or horizontally. Using the included partition clips you can join several partitions together. The welded ABS frame is extremely sturdy and its corner pieces securely hold the rigid panels in place. Their lightness makes organizing classrooms easier. Weighted feet for increased stability. No feet included.. Set consisting of four panels, 49″ x 24″ each, with screen-printed designs.

Fellowes Partition Additions Corner Shelf $13.99 0% 1 1 Each 1.62″ Height x 15.37″ Width x 11.25″ Depth 7528001 Maximize workspace and manage workflow with Partition Additions from Fellowes. This unique system moves essentials off the desktop, yet still keeps everything at your fingertips. Patented steel points are designed to grip your cubicle wall for vertical organization that’s practical, solid and secure. Ideal for displaying or storing office accessories, our Corner Shelf adds surface space while making use of wasted corner space. This sturdy shelf holds up to 5 lbs. and offers a surface area with a 10-3/4″ deep radius. Fellowes Fellowes, Inc File Organization Graphite No Panel Organizer Partition Additions Partition Additions Corner Shelf Partition-mountable www.fellowes.com

6’8H 5-Panel Portable Partition $1099.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 5 Panel Partition measures 9′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

5′H 9-Panel Portable Partition $1299.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 9 Panel Partition measures 16′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

6’8H 9-Panel Portable Partition $1546.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 9 Panel Partition measures 16′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

5′H 11-Panel Portable Partition $1499.39 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 11 Panel Partition measures 20′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

8′H 3-Panel Portable Partition $1092.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 3 Panel Partition measures 5′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

5′H 3-Panel Portable Partition $699.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 3 Panel Partition measures 5′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

4′H 13-Panel Portable Partition $1582.69 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

8′H 5-Panel Portable Partition $1332.79 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 5 Panel Partition measures 9′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

4′H 9-Panel Portable Partition $1320.09 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 9 Panel Partition measures 16′ 9L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

4′H 11-Panel Portable Partition $1531.59 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 11 Panel Partition measures 20′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

8′H 11-Panel Portable Partition $2290.79 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 11 Panel Partition measures 20′ 5L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

6′H 13-Panel Portable Partition $2028.99 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

6’8H 13-Panel Portable Partition $2186.09 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

8′H 13-Panel Portable Partition $2565.69 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 13 Panel Partition measures 24′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)

4′H 7-Panel Portable Partition $1023.39 Manufactured by Screenflex. Fabric/Vinyl. No assembly required. 29 1/4 wide end frames provide maximum stability during operation. Full length aluminum hinges add strength and stability throughout the entire partition. Sound absorbing/tackable partition panels. Six heights and six lengths available. Multiple fabric/vinyl styles and colors. Powder painted metal panel trim. 7 Panel Partition measures 13′ 1L. 12 Fabric Colors are: Summer Blue Grey Smoke Cranberry Sea Green Beech Sand Lake Stone Rose Mallard Walnut and Desert. 6 Vinyl Colors are: Blue Tide Granite Raspberry Mist Mint Sandalwood and Hazelnut. (SHIPS IN 21 DAYS)